A bridge stack is an electronic component composed of multiple diodes inside. The main function is rectification, adjusting the direction of current.
Categories：Product knowledge Date：2025-02-13 Hits：583 View »
TVS diode, also known as transient suppression diode, is a widely used new type of high-efficiency circuit protection device, which has extremely fast response time (sub nanosecond level) and considerable surge absorption capability.
Categories：Product knowledge Date：2025-02-13 Hits：595 View »
Fast Recovery Diode (FRD) is a semiconductor diode with good switching characteristics and short reverse recovery time. It is mainly used in electronic circuits such as switching power supplies, PWM pulse width modulators, and frequency converters, as a high-frequency rectifier diode, freewheeling diode, or damping diode.
Categories：Product knowledge Date：2025-02-11 Hits：656 View »
The transistor and field-effect transistor in digital electronic products are generally black, with most having three pins and a few having four pins (two pins in the transistor are connected, usually the emitter E or source S).
Categories：Product knowledge Date：2025-02-11 Hits：645 View »
There are two types of transistor based on their materials: germanium transistor and silicon transistor.
Categories：Product knowledge Date：2025-02-11 Hits：682 View »
Firstly, connect the multimeter to the test diode terminal, use the red probe of the multimeter to touch one of the pins of the transistor, and use the other probe of the multimeter to test the remaining pins.
Categories：Product knowledge Date：2025-02-10 Hits：689 View »
The working principle and characteristics of a transistor are essential knowledge that electronic technicians must master. There are three commonly used working states for a transistor: cutoff, amplification, and saturation, each with different conditions and characteristics. In fact, there is a fourth working state of the transistor in the circuit, although this state is not commonly used, it is also something we must understand.
Categories：Product knowledge Date：2025-02-10 Hits：990 View »
According to the different positive and negative resistance values of the PN junction in junction field-effect transistors A multimeter can be used to distinguish the three electrodes of a junction field-effect transistor.
Categories：Product knowledge Date：2025-02-10 Hits：1070 View »
According to the different positive and negative resistance values of the PN junction in junction field-effect transistors A multimeter can be used to distinguish the three electrodes of a junction field-effect transistor.
Categories：Product knowledge Date：2025-02-07 Hits：651 View »
DC parameters of field-effect transistors and micro variation parameters of field-effect transistors
Categories：Product knowledge Date：2025-02-07 Hits：674 View »
